Located in the USA

Shop
Custom Carpet Runners
Carpet Padding
Decorative Stair Hardware
Swatch Info
Resources

Search for:

Houz Facebook Pinterest YouTube

Skip to content

Located in the USA Call Us 203.888.5566

Contact us My account

Search for:

Shop
Custom Carpet Runners
Carpet Padding
Decorative Stair Hardware
Swatch Info
Resources

Custom Landing Quote

Custom Landing Quote Form

Please fill out and submit this form to obtain a quote for your custom landing project.

Step 1 of 13 - Landing Selection

0%

Landing Selection*
Please submit this form to obtain a quote for your custom landing project. Information needed: type of staircase and landing(s), stair counts, landing direction/dimensions and runner product selection. You'll work up from the bottom of the staircase. If your staircase is not seen here - please contact us. Please send photos of staircase and landing to: info@StairRunnerStore.com
- Single Turn "L" Shaped Landing
- Two "L" Shaped Landings - Within One Staircase
- "U" Shaped Landing, Double Turn on a Single Platform

CONFIRM LANDING TYPE - Please be sure that your landing is a Single Turn or "L" shape as those seen in the image below.*
- YES - my landing is Square or rectangular: On a single platform it turns just once - creating an "L" shaped staircase overall.
CONFIRM LANDING TYPE - Please be sure your staircase includes 2 "L" shaped landings, each on a single platform as shown below.
- Yes, I have 2 "L" shaped landings, each on a single platform within one staircase.
NOTE: Your 2nd landing info will be gathered in steps 9 and 10
CONFIRM LANDING TYPE - Please be sure that your landing is a "U" shaped on a single rectangular platform as seen below.*
- YES - I have "U" shaped landing on a single rectangular platform.

Stair Measurement - Tread + Riser*
- Yes, my steps are typical size: 18 to 19 inches total tread + riser.
NOT SURE? Please measure your steps. Most tend to be 18 to 19" total measurement step and riser. A total measurement starts at the back of the tread, forward, then wrapping the nose and down the riser. (minor differences from one step to another are normal) If your average measurement is 18 to 19" please click that option. If not please click "Other" and provide the average dimension.

IMPORTANT - When walking up the staircase - Which direction does your landing turn?*
We always discuss landing direction from the bottom of a staircase and working up. Our Fabrication is affected by the description of this direction so it is very important that this information is accurate, and consistently described only from the bottom up.
- My landing turns LEFT (when ascending/walking up)
- My landing turns RIGHT (when ascending/walking up)
IMPORTANT - When walking up the staircase - Which direction does your landing turn?*
We always discuss landing direction from the bottom of a staircase and working up. Our Fabrication is affected by the description of this direction so it is very important that this information is accurate, and consistently described only from the bottom up.
- My landing turns LEFT (when ascending/walking up)
- My landing turns RIGHT (when ascending/walking up)

Lower Stair Count - Number of Treads/Risers BELOW the landing?*
Stair counts are broken down into sections: those below and those above the landing. Working up from the bottom of the staircase - Count the lower stairs only - please choose your tread/riser count (for this section only) from the drop down list above.
Tread = the horizontal component/the part you walk on. Riser = the vertical component between each tread. You will have one more riser than tread in each run (section) of steps.

Landing Depth - In Inches*
As you face the landing when walking up the staircase this dimension is the full distance away from you - from the nosing to the wall.
Landing Width - In Inches*
As you face the landing when walking up the staircase, this dimension is the full width left to right/right to left - generally from a wall across to the first riser above the landing.
Landing Depth - In Inches*
Facing the landing when walking up the staircase this dimension is the full distance away from you - from the nosing to the wall.
Landing Span/Length - In Inches*
This dimension is generally the largest, the full length or span left to right/right to left.
Landing Return - In Inches*
This is the third leg of the "U" shape from the back of the landing (typically a wall) to the riser that sits just above the landing surface.

Upper Stair Count - Number of Treads/Risers ABOVE the landing?*
Stair counts are broken down into sections, those below and those above a landing. Working up from the riser just above the landing - Count the upper stairs only - please choose your tread/riser count (for this section only) from the drop down list above.
Tread = the horizontal component/the part you walk on. Riser = the vertical component between each tread. You will have one more riser than tread in each run of steps.
NOTE: If you have two landings within your staircase, this question is referring to the middle steps (this may just be a single riser between the 2 landings) - we'll ask for the uppermost steps/section later.

Do you have a 2nd Landing WITHIN the staircase?*
Yes
No
IMPORTANT - When walking up the staircase - Which direction does your landing turn?*
We always discuss landing direction from the bottom of a staircase and working up. Our Fabrication is affected by the description of this direction so it is very important that this information is accurate, and consistently described only from the bottom up.
My landing turns LEFT (when ascending/walking up)
My landing turns RIGHT (when ascending/walking up)

2nd Landing Depth - In Inches*
As you face the landing when walking up the staircase this dimension is the full distance away from you - from the nosing to the wall.
2nd Landing Width - In Inches*
As you face the landing when walking up the staircase, this dimension is the full width left to right/right to left - generally from a wall across to the first riser above the landing.
This field is hidden when viewing the form
Section Break

Uppermost Stair Count - Number of *Treads/**Risers ABOVE the 2nd landing?*
Stair counts are broken down into those below and those above a landing. Working up from the riser just above the 2nd landing - Count the uppermost stairs - please choose your tread/riser count from the drop down list above the photo.
*Tread = the horizontal component/the part you walk on. **Riser = the vertical component between each tread.
You will have one more riser than tread in each run of steps.

Average Tread Depth in Inches - for cutting pad*
Included in your quote will be Pad cut to fit for each landing and tread. For the treads - Please provide us with your average tread depth in inches - we need this information to cut pad to the correct size for the steps/treads - the width dimension is cut based on the width of your runner material - please provide us with the depth dimension.
Tread Depth is simply the front to back (top surface) dimension of a tread - from the apex of the nose to the back, as seen in the photo.

Runner Product Selection*
A product choice is needed to obtain a quote - the pattern repeat (which varies among products) must be added when fabricating a landing.
Product style/name, color and width: this information is found on each product page OR copy/paste the URL like this: https://stairrunnerstore.com/product/ancient-garden-stair-runner-57011-grey-cream-26/When a product is offered in 2 widths, the width information is part of the style name found on our product pages.
Amon 250000 Stair Runner 26.5 Inch
34 of 200 max characters

Name*
First Last
Email Address*
Enter Email Confirm Email
Phone*
Additional Information, Questions, Photos:
Please provide any additional information about your staircase, your runner project or any questions you may have. Please consider sending photos of the staircase and landing. Ideally, landing photos depicting the measuring tape showing the dimensions described above.Please send photos to: info@StairRunnerStore.com
0 of 350 max characters
Comments
This field is for validation purposes and should be left unchanged.

Shop

Where to Start
Shop all Runners
Quick Ship Runners
Custom Size Runners
Sale, Remnants
Carpet Padding
Stair Hardware

Services & Custom Finishes

Plan Your Project
Custom Carpet Runners
Inspiration Gallery
End Finish - Hall or Floor
Runner Ends - Staircase

Custom Landing Stair Runner Quote

RESOURCES

About Us
Reviews
Help Center
FAQ
Glossary
Swatch Information
Planning Resources

Straight Staircase Calculator

CONTACT

Contact Form
203-888-5566

Subscribe!

Want to receive the latest updates from us?

Email(Required)

CAPTCHA

Email
This field is for validation purposes and should be left unchanged.

©2025 StairRunnerStore.com. All rights reserved.

Terms of Service
Privacy Policy
Shipping Policy
Swatch Policy
All Policies

×

SHARE YOUR CART

Notifications

Shop
Custom Carpet Runners
Carpet Padding
Decorative Stair Hardware
Swatch Info
Resources

Cart

No products in the cart.

Cart

No products in the cart.

Cart

No products in the cart.